Griffin PowerJolt for iPhone 3G
A few people have been asking me about car chargers for the iPhone 3G so I thought I’d post a quick note about what I’m using.
First of all, be careful what you plug your shiny new iPhone into! Plenty of things are meant for iPods only and can actually fry your iPhone. Many iPod accessories do work with iPhones but unless you want to try out the warranty replacement program, do a quick google search about whatever device you are hoping is compatible. You’ve been warned!
Secondly, many old iPod accessories (and some 1st gen iPhone ones) use firewire as their method of powering/charging. Apple switched to USB power fairly recently so this is why many of these older devices won’t work with a newer iPod or iPhone. You will most likely get some variation on this message “This accessory is not compatible with your iPhone”.
You should be able to use any USB based car charging device - basically it’s a cigarette adaptor that has a USB port on the end. These tend to come with many gadgets these days - one came with a kit for my Nintendo DS, another with my GPS, etc. Simply plug in the USB cable that came with your iPhone 3G and you should be good to go. I didn’t want to have to lug that cable around so I simply picked up the Griffin PowerJolt (version 2) on my last trip to the Apple Store for $20. It comes with the USB plug and a black USB to Dock cable.
The ring around the USB port lights up green when powered.
and red when charging.
and here it’s connected in the car to my iPhone which is sporting my new green Speck PixelSkin cover and sitting in my Palm ‘Universal PDA holder’ which previously held my Treo 650.
So far so good…it completely charged my iPhone while driving home tonight.
Tuesday, July 29th, 2008 : Apple, Hardware, Reviews, iPhone : 7 Comments
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
7 Responses to “Griffin PowerJolt for iPhone 3G”
July 29th, 2008 at 6:03 pm
Griffin also has the PowerDuo Universal, which includes both the PowerJolt and a dual USB wall charger. The kit doesn’t include the cable, however.
July 29th, 2008 at 7:57 pm
Sweet! Thanks for the tip John! I’ll see if I can find one of these at a local future shop or best buy I guess.
July 29th, 2008 at 8:55 pm
Hey John — where did you get that nifty green case? You mention its a Speck Pixel skin. I love that color!
July 29th, 2008 at 9:05 pm
I got it at the Apple Store…cost $25 and it comes in a bunch of different colours. Pretty sure it would bounce if I dropped it - it’s very NERF like and soft.
September 25th, 2008 at 7:39 pm
Hi, I just purchased a PowerJolt V2 for the iPhone to use with my new iPhone 3G…
Although it does seem to charge the iPhone 3G if the phone is in standby, when I used for a 5 hour trip using the GPS the phone steadily discharged and then died at about the 5 hour mark.
I also notice that the light on plug never changes from Red/Amber to Green. I even tried using the PowerJolt when I knew that the iPhone 3G was fully charged and it still had the Red/Amber light…
Hvae you noticed any of this??? I have the 2.1 version of the firmware….
September 25th, 2008 at 7:53 pm
I’ve used mine in the car on a roadtrip and haven’t had any discharge issues like you described.
The green/red light doesn’t seem to change with any consistency and certainly not when done charging….saw this today while driving home.
October 22nd, 2008 at 2:56 pm
I purchased a PowerJolt V2 before my trip to San Francisco and Hawaii. I’ve never been to either location so I used the GPS all the time. I experienced the exact same issues as John Kauble experienced. From what I have read the PowerJolt V2 will only put out 500mA if everything on the iPhone is active (i.e. GPS & 3G) the phone needs more current and the phone will slowely discharge even though it is connected to power. 3 times on the trip my phone died while it was connected to the charger. I’ve also read the older PowerJolt for iPod/iPhone would put out 1000mA and works fine.